1.0 Don't Stress!
The feature sets of Fossil and Git overlap in many ways. Both are distributed version control systems which store a tree of check-in objects to a local repository clone. In both systems, the local clone starts out as a full copy of the remote parent. New content gets added to the local clone and then later optionally pushed up to the remote, and changes to the remote can be pulled down to the local clone at will. Both systems offer diffing, patching, branching, merging, cherry-picking, bisecting, private branches, a stash, etc.
Fossil has inbound and outbound Git conversion features, so if you start out using one DVCS and later decide you like the other better, you can easily move your version-controlled file content.¹
In this document, we set all of that similarity and interoperability aside and focus on the important differences between the two, especially those that impact the user experience.
Keep in mind that you are reading this on a Fossil website, and though we try to be fair, the information here might be biased in favor of Fossil, if only because we spend most of our time using Fossil, not Git. Ask around for second opinions from people who have used both Fossil and Git.
If you want a more practical, less philosophical guide to moving from Git to Fossil, see our Git to Fossil Translation Guide.
2.0 Differences Between Fossil And Git
Differences between Fossil and Git are summarized by the following table, with further description in the text that follows.
GIT FOSSIL more File versioning only VCS, tickets, wiki, docs, notes, forum, chat, UI, RBAC 2.1 ↓ A federation of many small programs One self-contained, stand-alone executable 2.2 ↓ Custom key/value data store The most used SQL database in the world 2.3 ↓ Runs natively on POSIX systems Runs natively on both POSIX and Windows 2.4 ↓ Bazaar-style development Cathedral-style development 2.5.1 ↓ Designed for Linux kernel development Designed for SQLite development 2.5.2 ↓ Many contributors Select contributors 2.5.3 ↓ Focus on individual branches Focus on the entire tree of changes 2.5.4 ↓ One check-out per repository Many check-outs per repository 2.6 ↓ Remembers what you should have done Remembers what you actually did 2.7 ↓ Commit first Test first 2.8 ↓ SHA-1 or SHA-2 SHA-1 and/or SHA-3, in the same repository 2.9 ↓
Git provides file versioning services only, whereas Fossil adds an integrated wiki, ticketing & bug tracking, embedded documentation, technical notes, a web forum, and a chat service, all within a single nicely-designed skinnable web UI, protected by a fine-grained role-based access control system. These additional capabilities are available for Git as 3rd-party add-ons, but with Fossil they are integrated into the design, to the point that it approximates "GitHub-in-a-box."
Even if you only want straight version control, Fossil has affordances not available in Git.
For instance, Fossil can do operations over all local repo clones and check-out directories with a single command. You can say "fossil all sync" on a laptop prior to taking it off the network hosting those repos, as before going on a trip. It doesn't matter if those repos are private and restricted to your company network or public Internet-hosted repos, you get synced up with everything you need while off-network.
You get the same capability with several other Fossil sub-commands as well, such as "fossil all changes" to get a list of files that you forgot to commit prior to the end of your working day, across all repos.
Whenever Fossil is told to modify the local checkout in some destructive way (fossil rm, fossil update, fossil revert, etc.) Fossil remembers the prior state and is able to return the check-out directory to that state with a fossil undo command. While you cannot undo a commit in Fossil — on purpose! — as long as the change remains confined to the local check-out directory only, Fossil makes undo easier than in Git.
For developers who choose to self-host projects rather than rely on a 3rd-party service such as GitHub, Fossil is much easier to set up: the stand-alone Fossil executable together with a 2-line CGI script suffice to instantiate a full-featured developer website. To accomplish the same using Git requires locating, installing, configuring, integrating, and managing a wide assortment of separate tools. Standing up a developer website using Fossil can be done in minutes, whereas doing the same using Git requires hours or days.
Fossil is small, complete, and self-contained. If you clone Git's self-hosting repository, you get just Git's source code. If you clone Fossil's self-hosting repository, you get the entire Fossil website — source code, documentation, ticket history, and so forth.² That means you get a copy of this very article and all of its historical versions, plus the same for all of the other public content on this site.
2.2 Self Contained
Git is actually a collection of many small tools, each doing one small part of the job, which can be recombined (by experts) to perform powerful operations. Git has a lot of complexity and many dependencies, so that most people end up installing it via some kind of package manager, simply because the creation of complicated binary packages is best delegated to people skilled in their creation. Normal Git users are not expected to build Git from source and install it themselves.
Fossil is a single self-contained stand-alone executable which depends only on common platform libraries in its default configuration. To install one of our precompiled binaries, unpack the executable from the archive and put it somewhere in your PATH. To uninstall it, delete the executable.
This policy is particularly useful when running Fossil inside a restrictive container, anything from classic chroot jails to modern OS-level virtualization mechanisms such as Docker. By using executable compression, our stock Dockerfile creates a container that's under 4 MiB on 64-bit Linux, including a capable Busybox environment for live debugging of the container's innards.
Modern Linux systems tend to make full static linking difficult, but our official executables do statically link to OpenSSL to remove a version dependency, resulting in an executable that's around 6 MiB, depending on the platform. (Details.) The result is dependent only upon widespread platform libraries with stable ABIs such as glibc, zlib, etc.
Full static linking is easier on Windows, so our precompiled Windows binaries are just a ZIP archive containing only "fossil.exe". There is no "setup.exe" to run.
Fossil is easy to build from sources. Just run "./configure && make" on POSIX systems and "nmake /f Makefile.msc" on Windows.
Contrast a basic installation of Git, which takes up about 15 MiB on Debian 10 across 230 files, not counting the contents of /usr/share/doc or /usr/share/locale. If you need to deploy to any platform where you cannot count on facilities like the POSIX shell, Perl interpreter, and Tcl/Tk platform needed to fully use Git as part of the base platform, the full footprint of a Git installation extends to more like 45 MiB and thousands of files. This complicates several common scenarios: Git for Windows, chrooted Git servers, Docker images...
Some say that Git more closely adheres to the Unix philosophy, summarized as "many small tools, loosely joined," but we have many examples of other successful Unix software that violates that principle to good effect, from Apache to Python to ZFS. We can infer from that that this is not an absolute principle of good software design. Sometimes "many features, tightly-coupled" works better. What actually matters is effectiveness and efficiency. We believe Fossil achieves this.
The above size comparisons aren't apples-to-apples anyway. We've compared the size of Fossil with all of its many built-in features to a fairly minimal Git installation. You must add a lot of third-party software to Git to give it a Fossil-equivalent feature set. Consider GitLab, a third-party extension to Git wrapping it in many features, making it roughly Fossil-equivalent, though much more resource hungry and hence more costly to run than the equivalent Fossil setup. The official GitLab Community Edition container currently clocks in at 2.66 GiB!
GitLab's requirements are easy to accept when you're dedicating a local rack server or blade to it, since its minimum requirements are more or less a description of the smallest thing you could call a "server" these days, but when you go to host that in the cloud, you can expect to pay about 8 times as much to comfortably host GitLab as for Fossil.³ This difference is largely due to basic technology choices: Ruby and PostgreSQL vs C and SQLite.
The Fossil project itself is hosted on a small and inexpensive VPS. A bare-bones $5/month VPS or a spare Raspberry Pi is sufficient to run a full-up project site, complete with tickets, wiki, chat, and forum, in addition to being a code repository.
2.3 Query Language
The baseline data structures for Fossil and Git are the same, modulo formatting details. Both systems manage a directed acyclic graph (DAG) of Merkle tree structured check-in objects. Check-ins are identified by a cryptographic hash of the check-in contents, and each check-in refers to its parent via the parent's hash.
The difference is that Git stores its objects as individual files in the .git folder or compressed into bespoke key/value pack-files, whereas Fossil stores its objects in a SQLite database file which provides ACID transactions and a high-level query language. This difference is more than an implementation detail. It has important practical consequences.
One notable consequence is that it is difficult to find the descendants of check-ins in Git. One can easily locate the ancestors of a particular Git check-in by following the pointers embedded in the check-in object, but it is difficult to go the other direction and locate the descendants of a check-in. It is so difficult, in fact, that neither native Git nor GitHub provide this capability short of crawling the commit log. With Fossil, on the other hand, finding descendants is a simple SQL query. It is common in Fossil to ask to see all check-ins since the last release. Git lets you see "what came before". Fossil makes it just as easy to also see "what came after".
Leaf check-ins in Git that lack a "ref" become "detached," making them difficult to locate and subject to garbage collection. This detached head state problem has caused grief for many Git users. With Fossil, detached heads are simply impossible because we can always find our way back into the Merkle tree using one or more of the relations in the SQL database.
The SQL query capabilities of Fossil make it easier to track the changes for one particular file within a project. For example, you can easily find the complete edit history of this one document, or even the same history color-coded by committer, Both questions are simple SQL query in Fossil, with procedural code only being used to format the result for display. The same result could be obtained from Git, but because the data is in a key/value store, much more procedural code has to be written to walk the data and compute the result. And since that is a lot more work, the question is seldom asked.
The ease of querying Fossil data using SQL means that status or history information about the project under management is easier to obtain. Being easier means that it is more likely to happen. Fossil reports tend to be more detailed and useful. Compare this Fossil timeline to its closest equivalent in GitHub. Judge for yourself: which of those reports is more useful to a developer trying to understand what happened?
The bottom line is that even though Fossil and Git are built around the same low-level data structure, the use of SQL to query this data makes the data more accessible in Fossil, resulting in more detailed information being available to the user. This improves situational awareness and makes working on the project easier.
Fossil is largely written in ISO C, almost purely conforming to the original 1989 standard. We make very little use of C99, and we do not knowingly make any use of C11. Fossil does call POSIX and Windows APIs where necessary, but it's about as portable as you can ask given that ISO C doesn't define all of the facilities Fossil needs to do its thing. (Network sockets, file locking, etc.) There are certainly well-known platforms Fossil hasn't been ported to yet, but that's most likely due to lack of interest rather than inherent difficulties in doing the port. We believe the most stringent limit on its portability is that it assumes at least a 32-bit CPU and several megs of flat-addressed memory.⁴ Fossil isn't quite as portable as SQLite, but it's close.
Over half of the C code in Fossil is actually an embedded copy of the current version of SQLite. Much of what is Fossil-specific after you set SQLite itself aside is SQL code calling into SQLite. The number of lines of SQL code in Fossil isn't large by percentage, but since SQL is such an expressive, declarative language, it has an outsized contribution to Fossil's user-visible functionality.
About half of Git's code is POSIX C, and about a third is POSIX shell code. This is largely why the so-called "Git for Windows" distributions (both first-party and third-party) are actually an MSYS POSIX portability environment bundled with all of the Git stuff, because it would be too painful to port Git natively to Windows. Git is a foreign citizen on Windows, speaking to it only through a translator.⁶
While Fossil does lean toward POSIX norms when given a choice — LF-only line endings are treated as first-class citizens over CR+LF, for example — the Windows build of Fossil is truly native.
The third-party extensions to Git tend to follow this same pattern. GitLab isn't portable to Windows at all, for example. For that matter, GitLab isn't even officially supported on macOS, the BSDs, or uncommon Linuxes! We have many users who regularly build and run Fossil on all of these systems.
2.5 Linux vs. SQLite
Fossil and Git promote different development styles because each one was specifically designed to support the creator's main software development project: Linus Torvalds designed Git to support development of the Linux kernel, and D. Richard Hipp designed Fossil to support the development of SQLite. Both projects must rank high on any objective list of "most important FOSS projects," yet these two projects are almost entirely unlike one another, so it is natural that the DVCSes created to support these projects also differ in many ways.
In the following sections, we will explain how four key differences between the Linux and SQLite software development projects dictated the design of each DVCS's low-friction usage path.
When deciding between these two DVCSes, you should ask yourself, "Is my project more like Linux or more like SQLite?"
2.5.1 Development Organization
Eric S. Raymond's seminal essay-turned-book "The Cathedral and the Bazaar" details the two major development organization styles found in FOSS projects. As it happens, Linux and SQLite fall on opposite sides of this dichotomy. Differing development organization styles dictate a different design and low-friction usage path in the tools created to support each project.
Git promotes the Linux kernel's bazaar development style, in which a loosely-associated mass of developers contribute their work through a hierarchy of lieutenants who manage and clean up these contributions for consideration by Linus Torvalds, who has the power to cherry-pick individual contributions into his version of the Linux kernel. Git allows an anonymous developer to rebase and push specific locally-named private branches, so that a Git repo clone often isn't really a clone at all: it may have an arbitrary number of differences relative to the repository it originally cloned from. Git encourages siloed development. Select work in a developer's local repository may remain private indefinitely.
All of this is exactly what one wants when doing bazaar-style development.
Fossil's normal mode of operation differs on every one of these points, with the specific designed-in goal of promoting SQLite's cathedral development model:
Personal engagement: SQLite's developers know each other by name and work together daily on the project.
Trust over hierarchy: SQLite's developers check changes into their local repository, and these are immediately and automatically synchronized up to the central repository; there is no "dictator and lieutenants" hierarchy as with Linux kernel contributions. D. Richard Hipp rarely overrides decisions made by those he has trusted with commit access on his repositories. Fossil allows you to give some users more power over what they can do with the repository, but Fossil only loosely supports the enforcement of a development organization's social and power hierarchies. Fossil is a great fit for flat organizations.
No easy drive-by contributions: Git pull requests offer a low-friction path to accepting drive-by contributions. Fossil's closest equivalents are its unique bundle and patch features, which require higher engagement than firing off a PR.⁷ This difference comes directly from the initial designed purpose for each tool: the SQLite project doesn't accept outside contributions from previously-unknown developers, but the Linux kernel does.
No rebasing: When your local repo clone syncs changes up to its parent, those changes are sent exactly as they were committed locally. There is no rebasing mechanism in Fossil, on purpose.
Sync over push: Explicit pushes are uncommon in Fossil-based projects: the default is to rely on autosync mode instead, in which each commit syncs immediately to its parent repository. This is a mode so you can turn it off temporarily when needed, such as when working offline. Fossil is still a truly distributed version control system; it's just that its starting default is to assume you're rarely out of communication with the parent repo.
This is not merely a reflection of modern always-connected computing environments. It is a conscious decision in direct support of SQLite's cathedral development model: we don't want developers going dark, then showing up weeks later with a massive bolus of changes for us to integrate all at once. Jim McCarthy put it well in his book on software project management, Dynamics of Software Development: "Beware of a guy in a room."
Branch names sync: Unlike in Git, branch names in Fossil are not purely local labels. They sync along with everything else, so everyone sees the same set of branch names. Fossil's design choice here is a direct reflection of the Linux vs. SQLite project outlook: SQLite's developers collaborate closely on a single coherent project, whereas Linux's developers go off on tangents and occasionally send selected change sets to each other.
Private branches are rare: Private branches exist in Fossil, but they're normally used to handle rare exception cases, whereas in many Git projects, they're part of the straight-line development process.
Identical clones: Fossil's autosync system tries to keep each local clone identical to the repository it cloned from.
Where Git encourages siloed development, Fossil fights against it. Fossil places a lot of emphasis on synchronizing everyone's work and on reporting on the state of the project and the work of its developers, so that everyone — especially the project leader — can maintain a better mental picture of what is happening, leading to better situational awareness.
By contrast, "…forking is at the core of social coding at GitHub". As of January 2022, Github hosts 47 million distinct software projects, most of which were created by forking a previously-existing project. Since this is roughly twice the number of developers in the world, it beggars belief that most of these forks are still under active development. The vast bulk of these must be abandoned one-off efforts. This is part of the nature of bazaar style development.
You can think about this difference in terms of feedback loop size, which we know from the mathematics of control theory to directly affect the speed at which any system can safely make changes. The larger the feedback loop, the slower the whole system must run in order to avoid loss of control. The same concept shows up in other contexts, such as in the OODA loop concept. Committing your changes to private branches in order to delay a public push to the parent repo increases the size of your collaborators' control loops, either causing them to slow their work in order to safely react to your work, or to over-correct in response to each change.
Each DVCS can be used in the opposite style, but doing so works against their low-friction paths.
The Linux kernel has a far bigger developer community than that of SQLite: there are thousands and thousands of contributors to Linux, most of whom do not know each other's names. These thousands are responsible for producing roughly 89× more code than is in SQLite. (10.7 MLOC vs. 0.12 MLOC according to SLOCCount.) The Linux kernel and its development process were already uncommonly large back in 2005 when Git was designed, specifically to support the consequences of having such a large set of developers working on such a large code base.
95% of the code in SQLite comes from just four programmers, and 64% of it is from the lead developer alone. The SQLite developers know each other well and interact daily. Fossil was designed for this development model.
When choosing your DVCS, we think you should ask yourself whether the scale of your software configuration management problems is closer to those Linus Torvalds designed Git to cope with or whether your work's scale is closer to that of SQLite, for which D. Richard Hipp designed Fossil. An automotive air impact wrench running at 8000 RPM driving an M8 socket-cap bolt at 16 cm/s is not the best way to hang a picture on the living room wall.
Fossil works well for projects several times the size of SQLite, such as Tcl, with a repository over twice the size and with many more core committers.
2.5.3 Individual Branches vs. The Entire Change History
Both Fossil and Git store history as a directed acyclic graph (DAG) of changes, but Git tends to focus more on individual branches of the DAG, whereas Fossil puts more emphasis on the entire DAG.
For example, the default behavior in Git is to only synchronize a single branch, whereas with Fossil the only sync option is to sync the entire DAG. Git commands, GitHub, and GitLab tend to show only a single branch at a time, whereas Fossil usually shows all parallel branches at once. Git has commands like "rebase" that help keep all relevant changes on a single branch, whereas Fossil encourages a style of many concurrent branches constantly springing into existence, undergoing active development in parallel for a few days or weeks, then merging back into the main line and disappearing.
This difference in emphasis arises from the different purposes of the two systems. Git focuses on individual branches, because that is exactly what you want for a highly-distributed bazaar-style project such as Linux. Linus Torvalds does not want to see every check-in by every contributor to Linux: such extreme visibility does not scale well. Contrast Fossil, which was written for the cathedral-style SQLite project and its handful of active committers. Seeing all changes on all branches all at once helps keep the whole team up-to-date with what everybody else is doing, resulting in a more tightly focused and cohesive implementation.
2.6 One vs. Many Check-outs per Repository
Because Git commingles the repository data with the initial checkout of that repository, the default mode of operation in Git is to stick to that single work/repo tree, even when that's a shortsighted way of working.
Fossil doesn't work that way. A Fossil repository is a SQLite database file which is normally stored outside the working checkout directory. You can open a Fossil repository any number of times into any number of working directories. A common usage pattern is to have one working directory per active working branch, so that switching branches is done with a cd command rather than by checking out the branches successively in a single working directory.
Fossil does allow you to switch branches within a working checkout directory, and this is also often done. It is simply that there is no inherent penalty to either choice in Fossil as there is in Git. The standard advice is to use a switch-in-place workflow in Fossil when the disturbance from switching branches is small, and to use multiple checkouts when you have long-lived working branches that are different enough that switching in place is disruptive.
While you can use Git in the Fossil style, Git's default tie between working directory and repository means the standard method for working with a Git repo is to have one working directory only. Most Git tutorials teach this style, so it is how most people learn to use Git. Because relatively few people use Git with multiple working directories per repository, there are several known problems with that way of working, problems which don't happen in Fossil because of the clear separation between a Fossil repository and each working directory.
This distinction matters because switching branches inside a single working directory loses local context on each switch.
For another example, you might have an active long-running test grinding away in a working directory, then get a call from a customer requiring that you switch to a stable branch to answer questions in terms of the version that customer is running. You don't want to stop the test in order to switch your lone working directory to the stable branch.
Disk space is cheap. Having several working directories — each with its own local state — makes switching versions cheap and fast.
Plus, cd is faster to type than git checkout or fossil update.
2.7 What you should have done vs. What you actually did
Git puts a lot of emphasis on maintaining a "clean" check-in history. Extraneous and experimental branches by individual developers often never make it into the main repository. Branches may be rebased before being pushed to make it appear as if development had been linear, or "squashed" to make it appear that multiple commits were made as a single commit. There are other history rewriting mechanisms in Git as well. Git strives to record what the development of a project should have looked like had there been no mistakes.
Fossil, in contrast, puts more emphasis on recording exactly what happened, including all of the messy errors, dead-ends, experimental branches, and so forth. One might argue that this makes the history of a Fossil project "messy," but another point of view is that this makes the history "accurate." In actual practice, the superior reporting tools available in Fossil mean that this incidental mess is not a factor.
Like Git, Fossil has an amend command for modifying prior commits, but unlike in Git, this works not by replacing data in the repository, but by adding a correction record to the repository that affects how later Fossil operations present the corrected data. The old information is still there in the repository, it is just overridden from the amendment point forward.
Fossil lacks almost every other history rewriting mechanism listed on the Git documentation page linked above. There is no rebase in Fossil, on purpose, thus no way to reorder or copy commits around in the commit hash tree. There is no commit squashing, dropping, or interactive patch-based cherry-picking of commit elements in Fossil. There is nothing like Git's filter-branch in Fossil.
The lone exception is deleting commits. Fossil has two methods for doing that, both of which have stringent limitations, on purpose.
The first is shunning. See that document for details, but briefly, you only get mandatory compliance for shun requests within a single repository. Shun requests do not propagate automatically between repository clones. A Fossil repository administrator can cooperatively pull another repo's shun requests across a sync boundary, so that two admins can get together and agree to shun certain committed artifacts, but a person cannot force their local shun requests into another repo without having admin-level control over the receiving repo as well. Fossil's shun feature isn't for fixing up everyday bad commits, it's for dealing with extreme situations: public commits of secret material, ticket/wiki/forum spam, law enforcement takedown demands, etc.
There is also the experimental purge command, which differs from shunning in ways that aren't especially important in the context of this document. At a 30000 foot level, you can think of purging as useful only when you've turned off Fossil's autosync feature and want to pluck artifacts out of its hash tree before they get pushed. In that sense, it's approximately the same as git rebase -i, drop. However, given that Fossil defaults to having autosync enabled for good reason, the purge command isn't very useful in practice: once a commit has been pushed into another repo, shunning is more useful if you need to delete it from history.
If these accommodations strike you as incoherent with respect to Fossil's philosophy of durable, unchanging commits, realize that if shunning and purging were removed from Fossil, you could still remove artifacts from the repository with SQL DELETE statements; the repository database file is, after all, directly modifiable, being writable by your user. Where the Fossil philosophy really takes hold is in making it difficult to violate the integrity of the hash tree. It's somewhat tangential, but the document "Is Fossil a Blockchain?" touches on this and related topics.
One commentator characterized Git as recording history according to the victors, whereas Fossil records history as it actually happened.
2.8 Test Before Commit
One of the things that falls out of Git's default separation of commit from push is that there are several Git sub-commands that jump straight to the commit step before a change could possibly be tested. Fossil, by contrast, makes the equivalent change to the local working check-out only, requiring a separate check-in step to commit the change. This design difference falls naturally out of Fossil's default-enabled autosync feature and its philosophy of not offering history rewriting features.
The prime example in Git is rebasing: the change happens to the local repository immediately if successful, even though you haven't tested the change yet. It's possible to argue for such a design in a tool like Git since it lacks an autosync feature, because you can still test the change before pushing local changes to the parent repo, but in the meantime you've made a durable change to your local Git repository. You must do something drastic like git reset --hard to revert that rebase or rewrite history before pushing it if the rebase causes a problem. If you push your rebased local repo up to the parent without testing first, you cannot fix it without violating the golden rule of rebasing.
Lesser examples are the Git merge, cherry-pick, and revert commands, all of which apply work from one branch onto another, and all of which commit their change to the local repository immediately without giving you an opportunity to test the change first unless you give the --no-commit option. Otherwise, you're back in the same boat: reset the local repository or rewrite history to fix things, then maybe retry.
Fossil cannot sensibly work that way because of its default-enabled autosync feature and its purposeful paucity of commands for modifying commits, as discussed in the prior section.
Instead of jumping straight to the commit step, Fossil applies the proposed merge to the local working directory only, requiring a separate check-in step before the change is committed to the repository. This gives you a chance to test the change first, either manually or by running your software's automatic tests. (Ideally, both!) Thus, Fossil doesn't need rebase, squashing, reset --hard, or other Git commit mutating mechanisms.
Because Fossil requires an explicit commit for a merge, it has the nice side benefit that it makes you give an explicit commit message for each merge, whereas Git writes that commit message itself by default unless you give the optional --edit flag to override it.
We don't look at this difference as a workaround in Fossil for autosync, but instead as a test-first philosophical difference: fossil commit is a commitment. When every commit is pushed to the parent repo by default, it encourages a working style in which every commit is tested first. It encourages thinking before acting. We believe this is an inherently good thing.
Incidentally, this is a good example of Git's messy command design. These three commands:
$ git merge HASH $ git cherry-pick HASH $ git revert HASH
...are all the same command in Fossil:
$ fossil merge HASH $ fossil merge --cherrypick HASH $ fossil merge --backout HASH
If you think about it, they're all the same function: apply work done on one branch to another. All that changes between these commands is how much work gets applied — just one check-in or a whole branch — and the merge direction. This is the sort of thing we mean when we point out that Fossil's command interface is simpler than Git's: there are fewer concepts to keep track of in your mental model of Fossil's internal operation.
Fossil's implementation of the feature is also simpler to describe. The brief online help for fossil merge is currently 41 lines long, to which you want to add the 600 lines of the branching document. The equivalent documentation in Git is the aggregation of the man pages for the above three commands, which is over 1000 lines, much of it mutually redundant. (e.g. Git's --edit and --no-commit options get described three times, each time differently.) Fossil's documentation is not only more concise, it gives a nice split of brief online help and full online documentation.
2.9 Hash Algorithm: SHA-3 vs SHA-2 vs SHA-1
Fossil started out using 160-bit SHA-1 hashes to identify check-ins, just as in Git. That changed in early 2017 when news of the SHAttered attack broke, demonstrating that SHA-1 collisions were now practical to create. Two weeks later, the creator of Fossil delivered a new release allowing a clean migration to 256-bit SHA-3 with full backwards compatibility to old SHA-1 based repositories.
In October 2019, after the last of the major binary package repos offering Fossil upgraded to Fossil 2.x, we switched the default hash mode so that from Fossil 2.10 forward, the conversion to SHA-3 is fully automatic. This not only solves the SHAttered problem, it should prevent a reoccurrence of similar problems for the foreseeable future.
Meanwhile, the Git community took until August 2018 to publish their first plan for solving the same problem by moving to SHA-256, a variant of the older SHA-2 algorithm. As of this writing in February 2020, that plan hasn't been implemented, as far as this author is aware, but there is now a competing SHA-256 based plan which requires complete repository conversion from SHA-1 to SHA-256, breaking all public hashes in the repo. One way to characterize such a massive upheaval in Git terms is a whole-project rebase, which violates Git's own Golden Rule of Rebasing.
Regardless of the eventual implementation details, we fully expect Git to move off SHA-1 eventually and for the changes to take years more to percolate through the community.
Almost three years after Fossil solved this problem, the SHAmbles attack was published, further weakening the case for continuing to use SHA-1.
The practical impact of attacks like SHAttered and SHAmbles on the Git and Fossil Merkle trees isn't clear, but you want to have your repositories moved over to a stronger hash algorithm before someone figures out how to make use of the weaknesses in the old one. Fossil has had this covered for years now, so that the solution is now almost universally deployed.
Asides and Digressions
things are lost in making a Git mirror of a Fossil repo due to
limitations of Git relative to Fossil. GitHub adds some of these
missing features to stock
Git, but because they're not part of Git proper,
exporting a Fossil repository to GitHub will
still not include them; Fossil tickets do not become GitHub issues,
Many things are lost in making a Git mirror of a Fossil repo due to limitations of Git relative to Fossil. GitHub adds some of these missing features to stock Git, but because they're not part of Git proper, exporting a Fossil repository to GitHub will still not include them; Fossil tickets do not become GitHub issues, for example.
The fossil-scm.org web site is actually hosted in several parts, so that it is not strictly true that "everything" on it is in the self-hosting Fossil project repo. The web forum is hosted as a separate Fossil repo from the main Fossil self-hosting repo for administration reasons, and the Download page content isn't normally synchronized with a "fossil clone" command unless you add the "-u" option. (See "How the Download Page Works" for details.) Chat history is deliberately not synced as chat messages are intended to be ephemeral. There may also be some purely static elements of the web site served via D. Richard Hipp's own lightweight web server, althttpd, which is configured as a front end to Fossil running in CGI mode on these sites.
That estimate is based on pricing at Digital Ocean in mid-2019: Fossil will run just fine on the smallest instance they offer, at US $5/month, but the closest match to GitLab's minimum requirements among Digital Ocean's offerings currently costs $40/month.
This means you can give up waiting for Fossil to be ported to the PDP-11, but we remain hopeful that someone may eventually port it to z/OS.
"Why is there all this Tcl in and around Fossil?" you may ask. It is because D. Richard Hipp is a long-time Tcl user and contributor. SQLite started out as an embedded database for Tcl specifically. ([Reference]) When he then created Fossil to manage the development of SQLite, it was natural for him to use Tcl-based tools for its scripting, build system, test system, etc. It came full circle in 2011 when the Tcl and Tk projects moved from CVS to Fossil.
A minority of the pieces of the Git core software suite are written in other languages, primarily Perl, Python, and Tcl. (e.g. git-send-mail, git-p4, and gitk, respectively.) Although these interpreters are quite portable, they aren't installed by default everywhere, and on some platforms you can't count on them at all. (Not just Windows, but also the BSDs and many other non-Linux platforms.) This expands the dependency footprint of Git considerably. It is why the current Git for Windows distribution is 44.7 MiB but the current fossil.exe zip file for Windows is 2.24 MiB. Fossil is much smaller despite using a roughly similar amount of high-level scripting code because its interpreters are compact and built into Fossil itself.
Both Fossil and Git support patch(1) files — unified diff formatted output — for accepting drive-by contributions, but it's a lossy contribution path for both systems. Unlike Git PRs and Fossil bundles, patch files collapse multiple checkins together, they don't include check-in comments, and they cannot encode changes made above the individual file content layer: you lose branching decisions, tag changes, file renames, and more when using patch files. Fossil 2.16 adds a fossil patch command that also solves these problems, but it is because it works like a Fossil bundle, only for uncommitted changes; it doesn't use Larry Wall's patch tool to apply unified diff output to the receiving Fossil checkout.